*Mermaid Planter* This planter does have 1 drainage hole.

I threw this planter on my potters wheel, after forming the pot I sculpted the tail of the mermaid onto the bottom of the pot. I added each scale (hundreds) to the exterior surface of the pot and a fin to the bottom and 3 holes for hanging the pot.
After the first firing I glazed the entire pot with several different glazes to get the color shown, it was then refired. I used a black cotton cord to hang this planter. Its on the heavier side because of all of the scales.

10 inches tall
5 1/2 inches wide
4 inches deep


2024 © JMN Pottery